웨비나
Say goodbye to difficult hand pumping and tedious fine adjustments~ 'Fluke 729 Automatic Pressure Calibrator'
In this October's webinar, we would like to introduce measurement solutions utilizing automatic pressure calibrators and other Fluke field calibration equipment.
How have you conducted pressure calibration work in the past? Most likely, you have struggled to increase pressure using hand pumps, or if your situation was better, you used equipment that applies pressure by pressing a button. However, even that convenience was short-lived, as you must have turned the fine adjustment vernier dial countless times to achieve the exact pressure you desired. Additionally, when leaks occurred somewhere in the numerous hoses connecting the transmitter, pressure module, hand pump, and measuring instrument—leaks that were difficult to locate—you likely felt quite frustrated and annoyed. The time and trial-and-error consumed in this process would be incalculable in monetary terms.
The newly released Fluke 729 automatic pressure calibration equipment can resolve these various inconveniences that many customers commonly experience. Simply input your desired pressure using the keypad, and without any additional equipment, you can apply pressure up to 20 bar using compressed air. There is no need to use a fine adjustment vernier dial, as the equipment automatically displays the accurate pressure value. Of course, automatic measurement across multiple step values is also possible.
While it is good to explain multiple times verbally, we hope you will have the opportunity to see our Fluke 729 firsthand at this webinar.
Additionally, we would like to briefly introduce other field calibration equipment being released by Fluke.
We hope this becomes a valuable opportunity for many to participate and gain useful information.
How have you conducted pressure calibration work in the past? Most likely, you have struggled to increase pressure using hand pumps, or if your situation was better, you used equipment that applies pressure by pressing a button. However, even that convenience was short-lived, as you must have turned the fine adjustment vernier dial countless times to achieve the exact pressure you desired. Additionally, when leaks occurred somewhere in the numerous hoses connecting the transmitter, pressure module, hand pump, and measuring instrument—leaks that were difficult to locate—you likely felt quite frustrated and annoyed. The time and trial-and-error consumed in this process would be incalculable in monetary terms.
The newly released Fluke 729 automatic pressure calibration equipment can resolve these various inconveniences that many customers commonly experience. Simply input your desired pressure using the keypad, and without any additional equipment, you can apply pressure up to 20 bar using compressed air. There is no need to use a fine adjustment vernier dial, as the equipment automatically displays the accurate pressure value. Of course, automatic measurement across multiple step values is also possible.
While it is good to explain multiple times verbally, we hope you will have the opportunity to see our Fluke 729 firsthand at this webinar.
Additionally, we would like to briefly introduce other field calibration equipment being released by Fluke.
We hope this becomes a valuable opportunity for many to participate and gain useful information.
댓글
- 40 Comments
- 변*환 (2017-11-21 오전 11:37:42)
- 세미나 잘 시청했습니다...
- 이*훈 (2017-10-31 오후 12:58:44)
- 세미나 잘 시청했습니다...
- 이*승 (2017-10-31 오전 10:34:51)
- 좋은 방송 기대합니다
- 김*석 (2017-10-31 오전 10:01:45)
- 감사합니다.
- 박*덕 (2017-10-30 오후 2:42:57)
- 지ㄴ공압에 대한 내용도 있으면 좋겠습니다.
- 이*승 (2017-10-30 오후 1:19:47)
- 세미나 기대합니다.
- 이*승 (2017-10-30 오후 1:19:33)
- 세미나 기대합니다.
- 유*호 (2017-10-30 오후 1:11:27)
- 좋은 세미나 감사합니다.
- 손*환 (2017-10-30 오전 11:57:53)
- 세미나 기대합니다.
- 김*욱 (2017-10-30 오전 11:57:21)
- 세미나 기대합니다.