웨비나
Automotive Ethernet Testing Methods Through Real-World Examples: From Latest Measurement Trends to Live Demonstrations
This Tektronix webinar covers a practical approach to Automotive Ethernet testing. It introduces the characteristics of Automotive Ethernet compared to conventional CAN/CAN-FD/LIN-based controllers, as well as practically applicable test procedures and solutions. Among various test methods for Automotive Ethernet technology such as 10BASE-T1S, 100/1000BASE-T1, and 10GBASE-T1, this session focuses primarily on 10BASE-T1S.
In particular, using Marvell's 88Q5152 evaluation board that supports 10BASE-T1S, the entire process from DUT connection to testing will be demonstrated. This enables verification from actual measurement procedures through result analysis, helping you apply the knowledge directly to your work.
1. Differences between existing CAN-FD / CAN / LIN and Automotive Ethernet
• Evolution of In-Vehicle Network protocols (adoption of Automotive Ethernet)
• Analysis of key characteristics and differences among major protocols
• Characteristics of 10BASE-T1S
2. Automotive Ethernet Testing
• Types and characteristics of Automotive Ethernet: 10BASE-T1S / 100BASE-T1 / 1000BASE-T1 / 10GBASE-T1
• Requirements for Automotive Ethernet Compliance Test
3. Efficient 10BASE-T1S Testing Methods
• Introduction of test methods complying with Open Alliance & IEEE 802.3 standards
• Overview of each measurement item
• Compliance test solution using Tektronix oscilloscope: 5 Series B MSO
댓글
- 11 Comments
- 박*원 (2024-09-24 오전 11:18:10)
- 텍트로닉스 장비 좋습니다.
- 김*홍 (2024-09-24 오전 10:43:54)
- 좋은 교육 가대합니다.
- 이*철 (2024-09-24 오전 9:43:14)
- 유익한 세미나 기대합니다. ^^
- 임*석 (2024-09-24 오전 9:07:32)
- 세미나 기대합니다
- 신*영 (2024-09-24 오전 8:00:22)
- 유익한 내용 기대됩니다.
- 김*범 (2024-09-20 오후 1:25:35)
- CMC-Test의 내용도 설명 부탁드립니다.
- 박*우 (2024-09-20 오전 9:54:01)
- EMC TEST 방법과 같이 설명부탁드리겠습니다.
- 이*진 (2024-09-20 오전 8:30:49)
- 유익한 내용 기대됩니다.
- 이*용 (2024-09-13 오전 10:58:06)
- 좋은강의 부탁 드립니다.
- 강*성 (2024-09-09 오후 4:33:21)
- 유익한 내용 기대합니다