웨비나
Effective Equipment Management Using a Vibration Meter
This seminar will focus on vibration analysis, which many people find challenging. When Fluke makes it, it's different. Forget about conventional vibration measurement devices. The first equipment is a vibration meter—the Fluke 805 Vibration Meter. Unlike conventional pen-type vibration devices, it is a breakthrough product that displays consistent vibration measurements regardless of who performs the measurement. In addition, it is a versatile device equipped with bearing diagnostic function, infrared temperature measurement capability, and data storage and output functions. The second equipment is the Fluke 810 Vibration Tester for diagnosing rotating equipment such as motors. Equipment that typically performs facility diagnostics through vibration measurement to identify issues such as mass imbalance, alignment problems, and bearing wear are commonly referred to as frequency analyzers or data acquisition devices. These are precisely the devices that make vibration analysis seem difficult. Consequently, measuring and analyzing these devices required training and considerable experience. To solve this problem, the Fluke 810 Vibration Tester was launched. Enter motor information and configuration. Then measure with the 3-axis vibration sensor. The Fluke 810 will handle the facility diagnostics. The Fluke 805 Vibration Meter, a vibration measurement device equipped with reliability, durability, and diverse functions, and the Fluke 810 Vibration Meter, which enables easy and convenient facility diagnostics, will be available to you very soon.

댓글
- 67 Comments
- (2014-11-26 오후 6:17:03)
- 혹시 방송보기에 문제가 있는 분은 070-4699-5320으로 연락 바랍니다.
- 이*호 (2014-11-25 오전 11:11:21)
- 님들은 방송이 보이시나요?
- 윤*석 (2014-11-25 오전 10:50:43)
- 좋은 내용이길 기대하며 지금 방송 봅니다~
- 이*호 (2014-11-25 오전 10:48:35)
- 기다렸던 방송인데 로딩이 안되네요..ㅠㅠ
- 이*호 (2014-11-25 오전 10:47:14)
- 기대됩니다.
- 박*권 (2014-11-25 오전 10:34:00)
- 좋은 교육 기대하겠습니다.
- 연*선 (2014-11-25 오전 10:33:00)
- 좋은 세미나 기대합니다.
- 박*성 (2014-11-25 오전 10:31:32)
- mlcc에 의한 pcb의 진동여부도 확인 되나요?
- 남*우 (2014-11-25 오전 10:28:57)
- 모터와 감속기 부분에서 진동관련 자세한 설명 부탁드립니다.
- 김*형 (2014-11-25 오전 10:26:58)
- 기대합니다~~
댓글 이벤트 당첨자
(김태*), (김동*), (권성*), (박종*), (최윤*), (서남*), (김진*), (진석*), (박인*), (유영*), (이일*), (김동*), (장청*), (이용*), (김지*), (정창*), (김지*), (박제*), (김석*), (이윤*), (손용*), (강재*), (장순*), (백현*), (강재*), (이상*), (임헌*), (*), (이정*)

.png)