[Series] ST Engineer Yuji Kawano 16 – “Decoupling Capacitor PCB Placement: Close Contact with MCU Is Essential”
MCUs are unfamiliar compared to CPUs or GPUs, but they are one of the most widely used semiconductors. Let's hear from Yoji Kawano, Manager at ST Syst…
2022.03.15 by 명세환 기자
[Series] ST Engineer Yuji Kawano ⑮ – “MCUs with Built-in Oscillators, Device Characteristic Matching Is Essential”
MCUs are unfamiliar compared to CPUs or GPUs, yet they are among the most widely used semiconductors. Let's hear from Yuki Kawano, Manager at ST Syste…
2022.03.08 by 명세환 기자
[Serial] ST Yuji Kawano Engineer ⑭-“CISC·RISC, Selecting the MCU That Suits Your Needs”
MCUs are unfamiliar compared to CPUs or GPUs, but they are among the most widely used semiconductors. Let's hear from Yuji Kawano, Manager of ST Syste…
2022.02.22 by 명세환 기자
Power Efficiency: A System-Wide Rethink is Necessary
The E4ds webinar was held on the 15th with a session by Kim Ki-beom, Senior Engineer at Microchip Technology, on the topic of "Designing Power-Efficie…
2022.02.15 by 성유창 기자
[Series] ST Engineer Yuji Kawano ⑬ – “RTOS Processing Completed Within Specified Time Range”
MCUs are unfamiliar compared to CPUs or GPUs, but they are among the most widely used semiconductors. Let us hear from Yuki Kawano, Manager of ST Syst…
2022.02.15 by 명세환 기자
[Technical contribution] ADI Frederik Dostal - “Burst mode and pulse skipping must be checked when designing power supply”
Analog Devices, Inc. FAE Frederik Dostal presents a solution to explain why pulses appear to be omitted in switch mode power supplies.
2022.02.15 by 명세환 기자
[Series] ST Yuji Engineer Kawano ⑫ - Timers, 'Pulse' Control via 'Clock' Calculation
MCUs are unfamiliar compared to CPUs or GPUs, yet they are among the most widely used semiconductors. Let's hear from Yuki Kawano, Manager of ST Syste…
2022.02.08 by 명세환 기자
.jpg)
[Technical contribution] ADI Frederik Dostal - “LT8330, positive feedback pin polarity required when using boost/SEPIC topology”
ADI's Frederick Dostal explains key considerations when designing buck regulator circuits using ADI's LT8330.
2022.01.21 by 명세환 기자
[Serial] ST Yuji Kawano Engineer ⑪ - MCU, Optimal for Microprocessing High-Speed Circuit Manufacturing
MCUs are unfamiliar compared to CPUs or GPUs, yet they are among the most widely used semiconductors. Let's hear from Yuki Kawano, Manager of ST Syste…
2022.01.17 by 명세환 기자
.jpg)
[Op-Ed] ADI Engineer Hakan Wuenlu – “ICs with Overvoltage Protection OTT Are the Best”
Analog Devices' Senior FAE Hakan Uenlue explains how to protect circuits from overvoltage in the analog front end using OTA amplifiers.
2021.12.16 by 명세환 기자
[Serial] ST Yuji Kawano Engineer ⑩ - Choosing the best MCU software, understanding the software layer is a must
MCUs are unfamiliar compared to CPUs or GPUs, but they are among the most widely used semiconductors. Let's hear from Yuji Kawano, Manager of ST Syste…
2021.12.13 by 명세환 기자
[Serial] ST Yuji Kawano Engineer ⑨ - GPIO, the Core of MCU Input/Output
MCUs are unfamiliar compared to CPUs or GPUs, but they are among the most widely used semiconductors. Let's hear from Yuki Kawano, Manager at ST Syste…
2021.12.07 by 명세환 기자
[Contribution] Matteo Maravita, ST Center Director: "Deep Edge: Overcoming AI's Limitations and Sustainable Growth"
We have arranged a meeting to hear the perspectives of Matteo Marabita, Head of ST AI Center, on Deep Edge, which is expected to experience rapid grow…
2021.11.26 by 명세환 기자
[Contribution] Timothy Kozono, ADI AE - "LTM4657: High-Efficiency, Compact Step-Down μModuleⓡ"
We have arranged a detailed briefing from Timothy Cozono, ADI AE, regarding ADI's LTM4657, a very compact, high-efficiency step-down μModule® device.
2021.11.23 by 명세환 기자
[Serial] ST Maintenance Engineer Kawano ⑧ - Choosing an MCU Connection Tool: Determined by Purpose and Content
MCUs are unfamiliar compared to CPUs or GPUs, yet they are among the most widely used semiconductors. Let's hear from Yuki Kawano, Manager at ST Syste…
2021.11.15 by 명세환 기자