| Provides up to 7.5kVRMS insulation performance
| Suitable for EV, industrial applications, etc.
| Maximum continuous operating voltage 1kVRMS·1.6kVDC

Mouser Electronics, Inc., the industry's leading New Product Introduction (NPI) distributor with the newest semiconductors, announced today that it is now stocking the Power by Linear LTM2810 µModule isolator from Analog Devices (ADI).

The LTM2810 µModule isolator, which provides up to 7.5kVRMS of isolation performance, is ideal for test and measurement equipment, medical equipment, electric vehicle (EV) and hybrid electric vehicle (HEV) systems, industrial applications, and instrumentation systems.

The LTM2810 µModule isolator includes a separate logic supply pin to allow easy interfacing across different logic levels from 1.6V to 5.5V.

Each side of the coupled isolator is powered by a 3-5.5 V power supply, providing 7.5 kVRMS of isolation for 1 minute between the input and output logic interfaces.

Suitable for systems with different ground potentials, the LTM2810 µModule isolator allows uninterrupted communication through common-mode transients faster than 50 kV/µs.

The LTM2810 µModule isolator is on the logic side.The transformer driver is integrated into the isolated side, and an LDO regulator is placed on the isolated side to regulate the rectified transformer output.

The LTM2810 µModule, a complete galvanic digital isolator, requires no external components and is available in SPI and I ² C (master mode only) compatible versions.

It also operates at high speed, providing 400kHz I2C isolation, 4MHz/8MHz SPI isolation, and 10MHz digital isolation. The LTM2810 µModule isolator features 16.2mm of creepage distance, a maximum continuous working voltage of 1kVRMS, and 1.6kVDC.