This page was machine-translated and may differ from the original. View original
Toshiba Launches High-Speed Communication Logic Output Photocoupler for PLCs
Toshiba begins shipping TLP2363 photocoupler
Easy compliance with IEC 61131-2 Type 1 specifications
Suitable for PLC, measuring equipment, control equipment, etc.
Toshiba announced on the 28th that it has shipped the 10Mbps high-speed communication logic output photocoupler 'TLP2363' for the 24V digital input interface of a programmable logic controller (PLC).

The TLP2363, when combined with appropriate resistors for current control, can be used to implement a 24 V digital input module compliant with the IEC 61131-2 Type 1 specification.
The new circuit suppresses chattering noise, so that the output appears distinctly low or high even for slow input signals with a rise and fall time of 60 seconds or less. Therefore, the waveform shaping circuit in the output section is not required, which can reduce the number of components.
Suitable for PLCs, measuring equipment, and control equipment, the TLP2363 has an operating temperature range of –40 to 105°C and a threshold input current minimum of 0.3 mA and maximum of 2.4 mA. The data transmission speed is typically 10 Mbps and can operate in 3.3 V/5 V supply voltage systems.
It is packaged with 5-pin SO6 and has a maximum height of 2.3 mm, so it can be freely placed on the PCB.
Easy compliance with IEC 61131-2 Type 1 specifications
Suitable for PLC, measuring equipment, control equipment, etc.
Toshiba announced on the 28th that it has shipped the 10Mbps high-speed communication logic output photocoupler 'TLP2363' for the 24V digital input interface of a programmable logic controller (PLC).
▲ Toshiba 10Mbps high-speed communication logic output photocoupler TLP2363
(Photo = Toshiba Electronic Devices & Storage Corporation)
(Photo = Toshiba Electronic Devices & Storage Corporation)
The TLP2363, when combined with appropriate resistors for current control, can be used to implement a 24 V digital input module compliant with the IEC 61131-2 Type 1 specification.
The new circuit suppresses chattering noise, so that the output appears distinctly low or high even for slow input signals with a rise and fall time of 60 seconds or less. Therefore, the waveform shaping circuit in the output section is not required, which can reduce the number of components.
Suitable for PLCs, measuring equipment, and control equipment, the TLP2363 has an operating temperature range of –40 to 105°C and a threshold input current minimum of 0.3 mA and maximum of 2.4 mA. The data transmission speed is typically 10 Mbps and can operate in 3.3 V/5 V supply voltage systems.
It is packaged with 5-pin SO6 and has a maximum height of 2.3 mm, so it can be freely placed on the PCB.
본 기사에 대한 정정·반론·추후보도 청구는 보도 청구 안내를, 그간 게재된 보도문은 정정·반론보도 모아보기를 참고해 주세요.















