This page was machine-translated and may differ from the original. View original
Fairchild Launches New FL7734 with Excellent Compatibility for a Wide Range of Dimmer Products
February 5, 2015 — Fairchild (NASDAQ: FCS) today announced the FL7734 Phase-Cut Dimmable Single-Stage LED Driver, a highly integrated LED controller solution optimized for 5W to 30W LED lighting solutions. With the FL7734, designers can quickly achieve superior light quality by leveraging high dimmer compatibility, while simultaneously meeting power factor (PF) and total harmonic distortion (THD) requirements by integrating a complete power factor correction (PFC) circuit.

The FL7734 solution utilizes Fairchild’s active dimmer driving technology to eliminate flicker and shimmer, providing over 90% dimmer compatibility with leading-edge, trailing-edge, and digital dimmers from various manufacturers. This solution fully complies with NEMA SSL 7A-2013 and ENERGY STAR® standards and offers the ability to freely control dimming curves and input current levels.
James Lee, Technical Marketing Manager at Fairchild, stated, “The FL7734 driver simplifies LED lighting product design through extensive dimmer compatibility. Because LED bulb and phase-cut dimmer suppliers are different, a superior phase-cut dimable bulb must work well with various dimmers.” "The FL7734 was developed with these points in mind," he said.
The FL7734 is a flyback (or buck-boost) pulse width modulator (PWM) controller that uses advanced primary-side control (PSR) techniques, minimizing the number of external components required for control and ultimately lowering the bill of material (BOM). Developed to meet stringent LED brightness control requirements, the FL7734 utilizes Fairchild’s innovative TRUECURRENT® PSR technology to enable constant current (CC) control with a deviation of less than ±1% over a wide range of input voltage conditions.
Like the FL7733A announced by Electronica last November, the FL7734 can be used in a wide variety of lamps, including GU10, Candel lights, A19, and PAR30/38 bulbs, downlights and flat panel lights, and indoor and outdoor lighting. Both solutions enable precise CC control with deviations of less than 1% under wide input voltage range conditions.
To meet safety regulations and ensure high reliability, the FL7734 device is equipped with overvoltage protection based on voltage sensing conditions VS and VDD, protection against open/short conditions on all pins of the control IC including the output diode and current sensing resistor, and protection against LED open/short and high temperature.
The FL7734 is available in an SOP 16-pin package. More details regarding the Design Tool, sample orders, and purchasing can be found on the FL7734 web page.
본 기사에 대한 정정·반론·추후보도 청구는 보도 청구 안내를, 그간 게재된 보도문은 정정·반론보도 모아보기를 참고해 주세요.














