Mouser to Supply ADI Vibration Sensors for IIoT System Monitoring
Published2020.05.21 12:18Development of smart sensor nodes in CBM systems
Simplifying the Z-axis vibration monitoring subsystem
Mouser Electronics announced today that it is now stocking the ADcmXL1021-1 vibration sensor from Analog Devices (ADI).
The ADcmXL1021-1 is a detection system that helps reduce repair costs and maintain productivity by monitoring potential overloads or failures in industrial and transportation equipment in the early stages.
The ADI ADcmXL1021-1, available from Mouser Electronics, is a single-axis (Z-axis) vibration monitoring subsystem designed to simplify the development of smart sensor nodes in condition-based monitoring (CBM) systems.
The device combines a wideband, low-noise MEMS accelerometer with an analog-to-digital converter (ADC), high-performance signal processing, data buffers, record storage, and a user interface that operates on most embedded processors.
The signal processing of the ADcmXL1021-1 includes high-speed data sampling (220 kSPS), 4096 time sample record length, windowing, fast Fourier transform (FFT), user-configurable spectral or time statistics alarms, and error flags.Includes.
Additionally, the ADcmXL1021-1 utilizes the ADXL1002 MEMS accelerometer, which features ultra-low noise density (26µg/√Hz), to deliver exceptional resolution. With a wide DC-to-maximum bandwidth of 10kHz, it can track key vibration signatures across multiple machine platforms.
It provides a high operating input range of ±50g, making it suitable for vibration measurement in high-bandwidth IIoT and Industry 4.0 applications, such as vibration analysis systems that monitor and diagnose machine or system status, as well as for safety shutdown detection.
Mouser also offers the EVAL-ADCM-1 evaluation kit, which includes the ADcmXL1021-1 module, breakout board, ADcmXL interface board, Cypress Semiconductor EZ-USB® FX3™ board, and required cables.
Users can connect this kit to a PC to access evaluation software that allows them to configure modules, register settings, data display, and data logging.
관련뉴스
ST Launches Vibration Detection Solution for Factory Maintenance
ST가 공장 장비의 스마트 유지보수에 최적화된 새로운 진동 감지 솔루션을 출시했다. IIS3DWB 진동 센서와 이 제품이 포함된 STEVAL-STWINKT1 다중 센서 평가 키트는 장비의 유지보수 필요성을 예측하여 생산성을 높이는 상태 모니터링 시스템 개발 속도를 올린다.
2020.04.09by 이수민 기자
How can we achieve domestic production of smart sensors for the air industry?
환경 센서 시장은 전체 센서 시장의 약 15%를 차지하고 있다. 특히 대기오염물질 측정용 가스 센서 시장규모는 2027년에는 300억 달러를 넘어설 것으로 추정된다. 국내기업이 이 시장에서 확고한 영역을 구축하기 위해선 기존 공기산업용 센서들의 문제점을 보완할 수 있는 쪽으로 개발 방향을 잡아야 한다.
2020.04.27by 이수민 기자
Sensor technology capable of detecting humidity within approximately 1cm has been developed.
ETRI has developed a high-sensitivity humidity sensor technology utilizing molybdenum disulfide (MoS₂). The humidity sensor developed by ETRI exhibits a sensitivity exceeding 66,000%, making it more than 660 times more sensitive than conventional sensors, and with a detection time of 0.5 seconds, it is up to 12 times faster than existing commercial sensors.
2020.05.18by 이수민 기자
Ecolab and K-water Discuss Innovation Collaboration in Advanced Industry Water Management
Ecolab and the Korea Water Resources Corporation jointly discussed cooperation directions for maximizing water use efficiency in advanced industries such as semiconductors and data centers and establishing sustainable water circulation. The two companies agreed to gradually develop a long-term cooperation model that combines water resource infrastructure and water management technology to promote water efficiency optimization, water reuse, and carbon reduction.
2026.08.28by 명세환 기자
에이치에너지, 녹색기술인증 획득…솔라온케어 가동률 99.82%
에이지에너지가 태양광 발전예측 및 I-V커브 이상진단 기술로 중소벤처기업부 녹색기술인증을 획득했다. AI 기반 자산관리 플랫폼 솔라온케어는 전국 3,000개 이상 발전소에 적용되어 99.82%의 시스템 가동률과 3.7% 발전성능 개선을 달성했다. 실시간 데이터 분석을 통해 모듈 노화와 부분 음영 등 미세한 손실을 조기에 감지하고 관리함으로써 발전 수익을 보호한다.
2026.08.25by 명세환 기자
