This page was machine-translated and may differ from the original. View original
Motor driving of air conditioners, air purifiers, pumps, etc.
TPD4162F, 10% lower power dissipation than TPD4152F
Driving a BLDC motor without a PWM controller IC
Toshiba Electronic Devices & Storage Corporation announced on the 29th that it has launched the high-voltage intelligent power device (IPD) 'TPD4162F'.

Designed to drive motors in products such as air conditioners, air purifiers and pumps, this product comes in a compact surface-mount package and is already shipping in volume.
Toshiba officials explained that the TPD4162F, manufactured using a new process, has about 10% less power loss than the TPD4152F.
It is equipped with various control circuits such as PWM circuit, 3-phase decode circuit, level shift high-side driving circuit, and low-side driving circuit, and an insulated gate bipolar transistor (IGBT) and fast recovery diode (FRD) are installed at the output stage.
Since it directly drives a brushless DC motor by receiving a square wave input signal from a Hall sensor or Hall IC, a PWM controller IC is not required.
Current limiting circuit, overcurrent protection The number of peripheral circuits has been reduced by incorporating various protection circuits, including a circuit, overheating shutdown circuit, and undervoltage protection circuit. The use of the compact surface-mount package, HSSOP31, also reduces the size and height of the motor control board.
TPD4162F, 10% lower power dissipation than TPD4152F
Driving a BLDC motor without a PWM controller IC
Toshiba Electronic Devices & Storage Corporation announced on the 29th that it has launched the high-voltage intelligent power device (IPD) 'TPD4162F'.

▲ TPD4162F IPD [Photo = Toshiba]
Designed to drive motors in products such as air conditioners, air purifiers and pumps, this product comes in a compact surface-mount package and is already shipping in volume.
Toshiba officials explained that the TPD4162F, manufactured using a new process, has about 10% less power loss than the TPD4152F.
It is equipped with various control circuits such as PWM circuit, 3-phase decode circuit, level shift high-side driving circuit, and low-side driving circuit, and an insulated gate bipolar transistor (IGBT) and fast recovery diode (FRD) are installed at the output stage.
Since it directly drives a brushless DC motor by receiving a square wave input signal from a Hall sensor or Hall IC, a PWM controller IC is not required.
Current limiting circuit, overcurrent protection The number of peripheral circuits has been reduced by incorporating various protection circuits, including a circuit, overheating shutdown circuit, and undervoltage protection circuit. The use of the compact surface-mount package, HSSOP31, also reduces the size and height of the motor control board.
본 기사에 대한 정정·반론·추후보도 청구는 보도 청구 안내를, 그간 게재된 보도문은 정정·반론보도 모아보기를 참고해 주세요.














