나는엔지니어다
This page was machine-translated and may differ from the original. View original

Advanced Capacitive Sensing Technology for Moisture-Resistant Touch and Digital Level Sensing

Preferred source on GooglePublished2026.10.12 13:43

Capacitive sensing is replacing mechanical buttons and contact-type water level sensors by virtue of its non-contact and movable-part-free characteristics. However, water and frequently changing ground conditions directly disturb its measurement principle. Based on Microchip webinar materials, this white paper describes the principles, configuration, and performance basis of Digital Level Sensing (DLS), which reports water level regardless of ground conditions, and Impulse Touch Sensing (ITS), which eliminates the effect of water at the moment of signal acquisition. Furthermore, it specifies application boundaries that designers should be aware of, including recommended mechanical stack-up below 5mm, inapplicability to metal containers, and the necessity of validation for media other than water.

*The full article is paid content for e4ds+ members. Click the ad below to read it free of charge.
인피니언 8월20일부터
To request a correction, reply or follow-up report on this article, see how to file a request. Previously published statements are collected in corrections & replies.

Comments