TI Launches Commercial CAN XL Transceiver TCAN6062

This page was machine-translated and may differ from the original. View original

TI Launches Commercial CAN XL Transceiver TCAN6062

Published2026.08.18 09:23

Supports 20Mbps and 2,048-byte Payload, Offers CAN FD and SIC Backward Compatibility and Ethernet Tunneling

As industrial network bandwidth demands increase, a transceiver implementing the CAN XL specification as commercial hardware has made its first market appearance. While maintaining compatibility with existing CAN-based systems, it enhances data processing performance and is expected to be utilized in high-performance industrial system design such as humanoid robots, industrial robots, and HMI (human-machine interface).

Texas Instruments (TI) announced on the 18th the launch of the new CAN (Controller Area Network) XL (extended data field length) transceiver TCAN6062. The product supports a maximum payload of 2,048 bytes per frame and a maximum data transfer rate of 20Mbps. The company explained that this is the first product commercialized for the mass market following the standardization of the CAN XL specification.

CAN FD and SIC Backward Compatibility and Ethernet Tunneling Support

The TCAN6062 has backward compatibility with CAN FD (flexible data rate) and CAN SIC (signal improvement capability), enabling gradual transition to CAN XL without completely redesigning existing systems, according to TI. It also supports Ethernet interoperability through TCP/IP (Transmission Control Protocol/Internet Protocol) tunneling, allowing diagnostics, sensor data, control traffic, and OTA updates to be processed on a single network. The SIC function reduces ringing by up to 80% in complex network environments, simplifying the validation procedures of multi-node architectures. Additionally, it features protection up to ±58V and broad input/output voltage compatibility to accommodate various industrial environments.

Dwight Byrd, General Manager of Interface Products at TI, stated, "Engineers require more data, faster speeds, and greater flexibility without compromising performance or stability. The TCAN6062 addresses these requirements and supports the development of faster and higher-performance industrial systems."

Contribution to CAN XL Standard Establishment and External Organization Evaluation

TI engineers participated as members of the CiA (CAN in Automation) technical group in establishing the ISO 11,898-2:2024 physical layer specification.

Holger Zeltwanger, Executive Director of CiA, stated, "With the launch of the first commercial CAN SIC XL transceiver, engineers worldwide can now apply CAN XL to actual designs."

Dr. Arthur Mutter, Chairman of CiA CAN XL SIG, evaluated that "CAN XL provides improved performance and cost efficiency compared to CAN FD, enabling reliable data exchange at speeds up to 20Mbit/s across various fields including industrial, robotics, and vehicle safety."

The TCAN6062 production model is currently available for purchase on TI.com.

#TI #로봇 #산업용 네트워크 #산업자동화 #모터제어 #트랜시버 #CAN XL #TCAN6062 #CAN FD #이더넷 터널링

본 기사에 대한 정정·반론·추후보도 청구는 보도 청구 안내를, 그간 게재된 보도문은 정정·반론보도 모아보기를 참고해 주세요.

배종인 기자

All articles by this reporter

관련뉴스

TI Supports Physical AI with Integrated Solution Encompassing Hardware and Software

텍사스 인스트루먼트(TI, Texas Instruments)는 김태훈 이사가 ‘e4ds Physical AI Frontier 2026’ 행사에서 ‘클라우드를 넘어 현실(Physical)로: 모빌리티와 산업 현장을 위한 엣지 AI 솔루션’을 주제로 발표를 진행하며, TI는 하드웨어와 소프트웨어를 아우르는 통합 솔루션으로 모빌리티와 산업 현장의 AI 혁신을 지원할 것이라고 밝혔다.

2026.03.17by 배종인 기자

TI and Nvidia Unveil 800VDC Power Architecture… AI Data Center Power Transition Begins in Earnest

텍사스 인스트루먼트(TI)가 엔비디아와 협력해 차세대 AI 데이터센터용 800VDC 전력 아키텍처를 공개했다. 이번 구조는 800V 직류 전력을 6V, 다시 1V 미만으로 낮추는 2단 변환 방식으로 설계돼 전력 손실과 배전 복잡도를 줄이는 데 초점을 맞췄다. TI는 핫스왑 컨트롤러, 800V-6V 절연 버스 컨버터, GPU용 다상 벅 컨버터, 30kW급 전원공급장치 등 관련 설계도 함께 제시했다. AI 서버의 전력 수요가 급증하는 상황에서 이번 발표는 데이터센터 전력 구조가 기존 저전압 중심 설계에서 고전압 DC 기반으로 이동하고 있음을 보여주는 사례로 해석된다.

2026.03.18by 명세환 기자

Next-generation magnetic sensors, Hall effect technology, are changing the game.

Smart door locks, notebooks, wireless earphones, and water/gas meters. Various electronic devices in our daily lives rely on invisible 'magnetic sensors' playing a crucial role, and among these, Hall effect-based in-plane magnetic sensors are emerging as a key sensing technology for next-generation electronic devices and smart infrastructure by simultaneously achieving miniaturization, low power consumption, and high reliability while surpassing the limitations of conventional reed switch and magnetoresistive technologies. In this context, according to a Technical Article titled "Hall Effect: How In-Plane Switches Increase Sensitivity and Reduce Design Costs" by Rishi Ramabadran recently released by Texas Instruments (TI), as miniaturization and low-power operation of electronic devices have accelerated in recent times, new solutions to replace existing magnetic switch technologies are drawing attention.

2026.03.19by 배종인 기자

TI Innovates Data Center and EV Design Paradigm with Next-Generation Isolated Power Modules

With power demand surging due to AI and electric vehicle proliferation, reliable power supply technology in limited spaces has emerged as a critical industry-wide challenge. Texas Instruments (TI) has unveiled the UCC34141-Q1 and UCC33420 high-performance isolated power modules, which employ proprietary packaging technology to address these requirements and establish a new direction for power design.

2026.03.24by 배종인 기자

Practical Training in Low-Noise, Low-Power Circuit Design All in One Place… Training Fee Support

고감도 아날로그 회로와 센서 기반 시스템 설계 역량을 강화할 수 있는 ‘2026 고급 엔지니어 실무 마스터 클래스’가 오는 4월16일 서울 가산동 e4ds 컨퍼런스 센터에서 열린다. 이번 과정은 온라인이 아닌 오프라인 유료 실습 교육으로 진행되며, 현장 중심의 심화 학습을 원하는 엔지니어를 대상으로 한다. 이번 교육은 텍사스 인스트루먼트(Texas Instruments)가 교육비를 지원해 정가 25만원에서 10만원 할인 된 15만원에 참가할 수 있다.

2026.03.26by 배종인 기자