Provides linear, drift bandgap voltage references
Published2015.10.20 14:09
Linear Technology Korea announced the release of a highly stable bandgap voltage reference family (product name: LT6657 ) featuring temperature drift characteristics of less than 1.5 ppm/°C. The LT6657 released by Linear provides low frequency noise of 0.5 ppm , long-term drift of less than 30 ppm, and thermal hysteresis of 35 ppm.The LT6657 is specified for an operating temperature range of –40°C to 125°C and is designed for the most demanding high-performance instruments, test equipment, and automotive systems. The buffered output can source or sink up to 10mA, and the input voltage range is at least 50mV higher than the output voltage or up to 40V, yet the current consumption is only 1.2mA.
In shutdown mode, the current consumption is reduced to µA. The load regulation error is less than 6 ppm/mA and the line regulation error is less than 4 ppm/V, both of which correspond to adverse conditions.
"A design manager at Linear Tellurology said, 'It has sufficient performance for next-generation ultra-precision electronics and features low dropout, a compact size, and applicable voltage reference options.'"
Comments
Related news
Linear Launches New 60V Dual DC/DC Controller
Linear Technology Korea (Branch Manager Hong Sa-gwak) announced the launch of the LTC3886, a 60V input dual output synchronous step-down DC/DC controller featuring programmable loop compensation and an I2C-based PMBus interface. The controller adopts a constant frequency, current mode architecture, allowing the output voltage to be programmed up to 13.8V. The LTC3886 is useful in demanding environments that typically require a wide input voltage range, such as automation, industrial, medical, telecommunications, and aerospace applications.
2015.08.13by 명세환 기자
Linear Launches 1.5A, 15V Synchronous Boost Regulator
Linear Technology Korea (Branch Manager Hong Sa-gwak) announced the launch of the LTC3121, a 3MHz current-mode, synchronous boost DC/DC converter with integrated output disconnect functionality. The product's internal 1.5A switch provides a high output voltage of 5.5V in an input voltage range of 1.8V during startup (0.5V during operation), making it ideal for battery or standard 3.3V and 5V power supplies. The LTC3121 delivers up to 400mA continuous output current at 12V when supplied with 5V input. Additionally, the product's 1.5A current limiting feature is well-suited for input current-constrained applications such as PCI Express, while minimizing the size of required external components.
2015.08.27by 명세환 기자
ESP32 Development Environment Selection and GPS Application Implementation
The ESP32 is a microcontroller that integrates Wi-Fi, Bluetooth, 12-bit ADC, capacitive touch, PWM, DAC, and UART in a single SoC. However, the abundance of features does not by itself solve the designer's problems. The real challenges lie in selecting the appropriate development environment, determining which pins can be used and which must be avoided, and converting raw data from modules into usable information. This document addresses ESP32 peripheral constraints (ADC2 and Wi-Fi coexistence limitation, UART1 occupancy, ADC non-linear regions), the trade-offs between Arduino IDE and ESP-IDF, and the process from connecting NEO-6M/NEO-M8N GPS modules to UART2, parsing NMEA sentences, and visualizing routes in Google Earth, all organized based on documented references.
2026.10.12by 편집부
MIPI CSI-2, DSI-2, C-PHY, D-PHY Test Solution Technical White Paper
The MIPI interface adopts a burst mode that transitions between low-power (LP) and high-speed (HS) states for low-power consumption, and in return, strict timing rules are imposed on state transitions. Additionally, the high-speed section operates as a packet-based protocol with headers, ECC, and CRC, so verification engineers must handle waveforms and protocols simultaneously. Traditional configurations combining general-purpose oscilloscopes and AWGs reveal limitations in setup complexity, measurement uncertainty, and lack of reproducibility when faced with these requirements. This white paper, based on webinar materials, organizes the structure of this problem and describes how the SV5C-DPTXCPTX generator for receiver testing and SV5C-DPRXCPRX analyzer for transmitter testing integrate state transition testing, stressed eye testing, and protocol analysis into a single bench, along with their application boundaries.
2026.10.12by 편집부
